How to test water heater thermostat without multimeter?

There are a few ways to test a water heater thermostat without a multimeter. One way is to use a thermometer to check the temperature of the water coming out of the heater. If the water temperature is not hot enough, the thermostat may be faulty. Another way to test the thermostat is to disconnect it from the power supply and then touch the two terminals together with a piece of wire. If the thermostat is working properly, you will hear a click.

Here is a more detailed explanation of each method:

Testing the water temperature

  1. Turn on the hot water faucet and let the water run for a few minutes.
  2. Place a thermometer into the stream of water.
  3. Wait for the temperature to stabilize.
  4. Compare the temperature to the setting on the thermostat.

If the water temperature is lower than the setting on the thermostat, the thermostat may be faulty.

Testing the thermostat with a wire

  1. Disconnect the thermostat from the power supply.
  2. Touch the two terminals together with a piece of wire.
  3. Listen for a click.

If you hear a click, the thermostat is working properly. If you do not hear a click, the thermostat may be faulty.

Important safety notes

  • Always disconnect the power supply to the water heater before testing the thermostat.
  • Be careful not to touch any live wires.
  • If you are not comfortable testing the thermostat yourself, it is best to call a professional plumber or electrician.

If you have tried both of the above methods and you are still not sure whether or not the thermostat is faulty, it is best to call a professional.

See also  What is dsi flt on rv water heater?

Leave a Comment